Restore Default Settings:
Reset the settings for the additional network to their defaults.
You need to enter the administrator password for the additional network.
Network Transmission Route:
Select the network to use the scan and fax functions from the control panel (Scan to Email, Scan to Folder, Scan to
Document Capture Pro, Fax to Email, Fax to Folder).
LDAP Server:
Select the network that has the LDAP server you want to use.
Using Optional Items
>
Ethernet Board (10/100/1000 Base-T, Ethernet)
>
Menu Options for Network Settings (
…
356
To Next Page
Loading...
