Remote Receive:
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax
Select options to reject receiving junk faxes.
❏ Rejection Number List: If the other party's phone number is in the rejection number list, set
whether to reject the incoming faxes.
❏ Fax Header Blank: If the other party's phone number is blocked, set whether to reject
receiving the faxes.
❏ Unregistered Contacts: If the other party's phone number is not in the contacts, set whether
to reject receiving the faxes.
Edit Blocked Number list
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters
using 0-9, *, #, or space.
Receiving Paper Size:
Select the maximum paper size for faxes that the printer can receive.
Save/Forward File Format:
File Format:
Select the format that you want to use for saving or forwarding faxes from PDF or TIFF.
PDF Settings:
Selecting PDF in Save/Forward File Format enables the settings.
Document Open Password:
Password Setting:
Enables to set a document open password.
Password:
Set a document open password.
Permissions Password:
Password Setting
Enables to set a password for printing or editing in a PDF le.
Product Information
>
Settings Menu List
>
General Settings
389
To Next Page
Loading...
