❏ Access to Language
❏ Access to ick Paper
❏ Access to Quiet Mode
❏ Protection of Personal Data
Access Control:
Select On to restrict product features. is requires users to log into the product control panel
with their user name and password before they can use control panel features. In Accept
Unknown User Jobs, you can select whether or not to allow jobs that do not have the
necessary authentication information.
Admin Settings:
❏ Admin Password
Set, change, and clear an administrator password.
❏ Lock Setting
Select whether or not to lock the control panel using the password registered in Admin
Password.
Password Encryption:
Select On to encrypt your password. You can also connect a USB device to backup the
encryption key.
Audit Log:
Select On to record an audit log.
Program Verication on Start Up:
Select On to verify the printer's program when starting up.
Customer Research:
Select Approve to provide product usage information such as the number of prints to Seiko Epson
Corporation.
Restore Default Settings:
Reset the settings in the following menus to their defaults.
❏ Network Settings
❏ Copy Settings
❏ Scan Settings
❏ Fax Settings
❏ Clear All Data and Settings
Firmware Update:
You can get rmware information such as your current version and information on available updates.
Update:
Check if the latest version of the rmware has been uploaded to the network server. If an
update is available, you can select whether or not to start updating.
Product Information
>
Settings Menu List
>
General Settings
403
To Next Page
Loading...
