Epson WorkForce Pro WF-C879RBAM - Page 480

3.
Select the device you want to
congure
from the device list.
4.
Click Device Conguration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5.
Click Common > Contacts.
6.
Click Browse on Import.
7.
Select the le you want to import and then click Open.
When you select the binary le, in Password enter the password you set when exporting the le.
8.
Click Import.
e conrmation screen is displayed.
9.
Click OK.
e
validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
❏ Read more le
Click when you want to import multiple les.
10.
Click Import, and then click OK on the import completion screen.
Return to the device's property screen.
11.
Click Transmit.
12.
Click OK on the conrmation message.
e
settings are sent to the printer.
13.
On the sending completion screen, click OK.
e printer's information is updated.
Open the contacts from Web
Cong
or printer's control panel, and then check that the contact is updated.
Cooperation between the LDAP Server and Users
When cooperating with the LDAP server, you can use the address information registered to the LDAP server as the
destination of an email or fax.
Conguring the LDAP Server
To use the LDAP server information, register it on the printer.
1.
Access the Web Cong and select the Network tab > LDAP Server > Basic.
Administrator Information > Settings to Use the Printer > Making Contacts Available
480