Epson WorkForce Pro WF-C879RBAM - Page 509

3.
Select Admin Password > Register.
4.
Enter the new password.
5.
Enter the password again.
Note:
You can change or delete the administrator password when you select Change or Reset on the Admin Password screen and
enter the administrator password.
Conguring
the Administrator Password from a Computer
You can set the administrator password using Web Cong.
1.
Access Web Cong and select the Product Security tab > Change Administrator Password.
2.
Enter a password to New Password and Conrm New Password. Enter the user name, if necessary.
If you want to change the password to new one, enter a current password.
3.
Select OK.
Note:
❏ To set or change the locked menu items, click Administrator Login, and then enter the administrator password.
❏ To delete the administrator password, click Product Security tab > Delete Administrator Password, and then enter
the administrator password.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 374
Controlling the Panel Operation
If you set the administrator password and enable the Lock Setting, you can lock the items related to the printer’s
system settings so that users cannot change them.
Enabling the Lock Setting
Enable the Lock Setting for the printer where the password is set.
Specify an administrator's password rst.
Enabling the Lock Setting from the Control Panel
1.
Select Settings on the printer's control panel.
2.
Select General Settings > System Administration > Security Settings > Admin Settings.
3.
Select On on Lock Setting.
Check that
is displayed on the home screen.
Administrator Information > Managing the Printer > Administrator Settings
509