Epson WorkForce Pro WF-C879RBAM - Page 522

❏ Hardware Status
Check the status of each function of the printer.
❏ Job History
Check the job log for print jobs, transmission jobs, and so on.
❏ Panel Snapshot
Display a screen image snapshot that is displayed on the control panel of the device.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 374
Receiving Email Notications When Events Occur
About Email
Notications
is is the notication function that, when events such as printing stop and printer error occur, send the email to
the specied address.
You can register up to ve destinations and set the notication settings for each destination.
To use this function, you need to set up the mail server before setting up notications.
Related Information
& “Conguring a Mail Server” on page 452
Conguring Email Notication
Congure email notication by using Web Cong.
1.
Access Web
Cong
and select the Device Management tab > Email
Notication
.
2.
Set the subject of email notication.
Select the contents displayed on the subject from the two pull-down menus.
❏ e selected contents are displayed next to Subject.
❏ e same contents cannot be set on le and right.
❏ When the number of characters in Location exceeds 32 bytes, characters exceeding 32 bytes are omitted.
3.
Enter the email address for sending the notication email.
Use A-Z a-z 0-9 ! # $ % & ' * + - . /= ? ^ _ { | } ~ @, and enter between 1 and 255 characters.
4.
Select the language for the email notications.
5.
Select the check box on the event for which you want to receive a notication.
e number of Notication Settings is linked to the destination number of Email Address Settings.
Example :
Administrator Information > Managing the Printer > Monitoring a Remote Printer
522