Epson WorkForce Pro WF-C879RBAM - Page 535

9.
Send the CSR to a
certicate
authority and obtain a CA-signed
Certicate
.
Follow the rules of each certicate authority on sending method and form.
10.
Save the issued CA-signed Certicate to a computer connected to the printer.
Obtaining a CA-signed Certicate is complete when you save a certicate to a destination.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 374
CSR Setting Items
Items Settings and Explanation
Key Length Select a key length for a CSR.
Common Name You can enter between 1 and 128 characters. If this is an IP address, it should be a
static IP address. You can enter 1 to 5 IPv4 addresses, IPv6 addresses, host names,
FQDNs by separating them with commas.
The rst element is stored to the common name, and other elements are stored to
the alias eld of the certicate subject.
Example:
Printer's IP address : 192.0.2.123, Printer name : EPSONA1B2C3
Common Name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123
Organization/ Organizational Unit/
Locality/ State/Province
You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide
distinguished names with commas.
Country Enter a country code in two-digit number specied by ISO-3166.
Sender's Email Address You can enter the sender's email address for the mail server setting. Enter the
same email address as the Sender's Email Address for the Network tab > Email
Server > Basic.
When creating a CSR by selecting the Network Security tab > S/MIME > Client
Certicate, this setting is not required because the sender's email address for the
mail server setting is set automatically. Congure the sender's email address for
the mail server settings in advance.
Related Information
& “Obtaining a CA-signed Certicate” on page 534
Importing a CA-signed Certicate
Import the obtained CA-signed
Certicate
to the printer.
Administrator Information > Advanced Security Settings > Using a Digital Certicate
535