Epson WorkForce Pro WF-C879RBAM - Page 565

You can acquire the logs of each device and user in cooperation with the server, and congure restrictions on the
device and functions that can be used for each user and group. It can be used with Epson Print Admin (Epson
Authentication System) or a third-party authentication system.
If you connect an authentication device, you can also perform user authentication using the ID card.
Conguring Epson Open Platform
Enable Epson Open Platform so that you can use the device from the authentication system.
1.
Access Web Cong and then select the Epson Open Platform tab > Product Key or License Key.
2.
Enter a value for each item.
❏ Serial Number
e
serial number of the device is displayed.
❏ Epson Open Platform Version
Select the version of Epson Open Platform. e corresponding version varies depending on the
authentication system.
❏ Product Key or License Key
Enter the product key obtained from the dedicated Web site. See the Epson Open Platform manual for
details such as how to obtain the product key.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e
printer is updated.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 374
Conguring
the Authentication Device
You c a n
congure
the authentication device used in the authentication system from the Device Management tab >
Card Reader.
For more information, see the manual of the authentication system.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 374
Administrator Information > Advanced Security Settings > Using Epson Open Platform
565