Epson WorkForce Pro WF-C879RBAM - Page 76

Paper/Quality Tab
Tray Selection:
Select the paper source and media.
Paper Source:
Select the paper source from which the paper is fed.
Select Automatically Select to automatically select the paper source selected in the Paper
Setting on the printer.
Media:
Select the type of paper on which you print. If you select Unspecied, printing is performed
from the paper source for which the paper type is set to the following in the printer's settings.
plain papers, Preprinted, Letterhead, Color, Recycled, High quality plain paper
However, paper cannot be fed from a paper source for which the paper source is set to o in
the printer's Auto Select Settings.
Color:
Select the color for your print job.
Layout Tab
Orientation:
Select the orientation you want to use to print.
Print on Both Sides:
Allows you to perform 2-sided printing.
Page Order:
Select to print from the top or the last page. If you select Back to Front, the pages are stacked in the
correct order based on page number aer printing.
Page Format:
Pages per Sheet:
Pages per Sheet Layout:
Allows you to specify the page layout when printing several pages on one sheet.
Booklet:
Booklet Binding:
Select the binding position for booklet.
Draw Borders:
Select this if you want to place a border line for each page when printing several pages on one
sheet or when creating a booklet.
Printing > Printing Documents > Printing a Document Using the PostScript Printer Driver (Windows)
76