EasyManua.ls Logo

Epson Workforce Pro WF-M5299DW

Epson Workforce Pro WF-M5299DW
228 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
217
Security WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WPA2-Enterprise (AES)
WEP (64/128 bit)
Note: Wi-Fi Direct mode supports only WPA2-PSK (AES) security.
Frequency band 2.4 GHz
Maximum radio-frequency
power transmitted
20 dBm (EIRP)
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note: Wi-Fi Direct Simple AP mode available even if you connect
the product to an Ethernet network.
Ethernet
Standard IEEE802.3i (10BASE-T)*
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)*
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
* Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
Security Protocol
IEEE802.1X; requires the connected device to comply with IEEE802.1X
IPsec/IP Filtering
SSL/TLS; either HTTPS Server/Client or IPPS
SMTPS (STARTTLS, SSL/TLS)

Table of Contents

Related product manuals