Epson XP-5200 User Manual

34
• To enter numbers and symbols, select .
• To enter a space, select .
• To finish entering your network name or password, select OK.
7. Select the Enter Password field and use the displayed keyboard to enter your network password.
8. When you are finished, confirm the displayed network settings and select Start Setup to begin
setup.
9. Do one of the following:
• If setup was successful, select Print Check Report to print a network setup report or OK to finish
with the setup.
• If setup was unsuccessful, select Print Check Report to print a network setup report or Re-enter
to re-enter your network name and password again.
10. Press the home button to return to the Home screen.
The Wi-Fi icon is displayed on the LCD screen and indicates your wireless connection status. If
the product is not connected to the network, you may have selected the wrong network name or
entered the password incorrectly. Repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on
the Start Here sheet.
Parent topic: Wi-Fi Infrastructure Mode Setup

Epson XP-5200 Specifications

General

Maximum Print Resolution	5760 x 1440 dpi
Duplex Printing	Yes
Display	2.4" color LCD
Scan Resolution	1200 x 2400 dpi
Functions	Print, Copy, Scan
Wireless	Yes
Paper Sizes Supported	A4, A6, B5
Input Paper Capacity	100 sheets
Scanner Type	Flatbed
Connectivity	USB, Wi-Fi
Ink Cartridge Configuration	4 individual cartridges (Black, Cyan, Magenta, Yellow)
Mobile Printing	Epson Connect (Epson Email Print, Epson iPrint App, Epson Remote Print), Apple AirPrint, Mopria Print Service