55
• For pre-punched paper, load a single sheet of defined-size plain paper with holes at the left or
right. Adjust the print position of your file to avoid printing over the holes. Automatic 2-sided
printing is not available for pre-punched paper
• For paper longer than Legal size, make sure the end of the paper is cut perpendicularly. A
diagonal cut may cause paper feed problems. Long paper cannot be held in the output tray.
Prepare a box or tray to make sure that paper does not fall on the floor. Do not touch paper that is
being fed or ejected. It could injure your hand or cause print quality to decline.
• Check the paper package for any additional loading instructions.
• To achieve high-quality printouts with genuine Epson paper, use the paper in the environment
stated on the instructions supplied with the paper.
• If you use paper with binder holes, load only one sheet at a time in only these sizes: Letter
(8.5 × 11 inches [216 × 279 mm]), A4 (8.3 × 11.7 inches [210 × 297 mm]), A5 (5.8 × 8.2 inches
[148 × 210 mm]), A6 (4.1 × 5.8 inches [105 × 148 mm]), B5 (7.2 × 10.1 inches [182 × 257 mm]), or
Legal (8.5 × 14 inches [216 × 356 mm]).
Parent topic: Loading Paper
Related references
Paper Loading Capacity
Paper Specifications
Printable Area Specifications
Paper Loading Capacity
See the table here for the loading capacity of the paper cassette.
To Next Page
Loading...
Need help?
General
