6 • Working with the APC 3
34 / 70
80114-770_V23802
2021-01
Depending on the application, a lower argon flow may be appropriate (e.g. the risk of
blowing argon into body cavities, gas embolism) or also a higher flow.
1. If the instrument symbol for the required instrument is not highlighted, touch the
relevant instrument symbol.
Fig. 6-1
2. Touch the CUT or COAG effect display.
Fig. 6-2
The window with the effect display and the display for the Argon flow opens.
3. Touch the display for the Argon flow.
To Next Page
