EROAD ELD - Certifying and Logging Out

2322
3. Tap the Duty Status on the graph that you want to correct,
or tap the left arrow or right arrow below the graph
to locate the duty status that needs correction.
4. Tap the Edit icon on the lower right side of the screen.
The log entry for that day appears on screen.
There are several menu options on the Edit screen that can be
used to modify your logs, which are described in the following
table. Instructions to use these options are described in the
following subsections.
Tip:
You cannot shorten or edit driving time that was
automatically recorded.
3.7.1 Adding a Remark
You can use the Remark icon to annotate a duty status.
Perform the following steps to add a remark. See section 3.7,
Correcting Logs for illustrations of steps 1 – 4.
1. Tap the Logs icon on the Home screen.
2. Tap the Left arrow or Right arrow until you locate the
point in your logs where you want to annotate a record.
3. Tap the View/Edit icon on the Logs screen.
4. Tap the Edit icon on the View/Edit screen. The Edit
Summary screen appears.
5. Tap the Remark icon. The Add a Remark screen
appears.
6. Enter your comments in the Add Remark field.
7. Tap the Done button.
3.7.2 Deleting a Record
You can use the Delete icon to delete a record. Perform
the following steps to delete a record. See section 3.7,
Correcting Logs for illustrations of steps 1 – 4.
1. Tap the Logs icon on the Home screen.
2. Tap the Left arrow or Right arrow until you locate the
point in your logs where you want to delete a record.
3. Tap the View/Edit icon on the Logs screen.
4. Tap the Edit icon on the View/Edit screen. The Edit
Summary screen appears.
5. Tap the Delete icon. The Delete Duty Status prompt
appears.
6. Tap the Delete button to confirm the action or tap the
Cancel button.