4 INSTALLATION
0463 933 001
- 13 -
© ESAB AB 2023
4 INSTALLATION
The installation must be carried out by a professional.
CAUTION!
This product is intended for industrial use. In a domestic environment this product may cause
radio interference. It is the user's responsibility to take adequate precautions.
4.1 Location
Position the power source so that cooling air inlets and outlets are not obstructed.
WARNING!
Electric shock! Do not touch the workpiece or the
welding head during operation!
WARNING!
The wheels may freely slide on slopes greater than 10 degrees. Take precautions while
working on the slopes.
4.2 Move instructions (No lifting)
Mechanical lifting must be done with both outer handles.
To Next Page
Loading...
