ESAB Rustler EM 201C User Manual

APPENDIX
0463 933 001
- 41 -
© ESAB AB 2023
WEAR PARTS
Item Denomination Ordering no. Notes
A Pressure roller 0455 907 001
B Feed roller 0367 556 001 Ø0.6-0.8mm Fe, Ss, cored wire.
0367 556 002 Ø0.6-0.8mm Fe, Ss, cored wire.
0367 556 003 Ø0.6-0.8mm Fe, Ss, cored wire.
0367 556 004 Ø1.0-1.2mm Al wire.
C Inlet nozzle 0466 074 001
D Insert tube 0455 894 001 Plastic, must be used together with item
0455 885 001, for welding with Al wire.
0455 889 001 Steel, must be used together with item
0455 886 001.
E Outlet nozzle 0455 885 001 Must be used together with item 0455
894 001, for welding with Al wire.
0455 886 001 Must be used together with item 0455
889 001.
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wire
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires MUST be
used. It is recommended to use 3m long welding torch for aluminium wires, equipped with appropriate
wear parts.

ESAB Rustler EM 201C Specifications

General

Brand	ESAB
Model	Rustler EM 201C
Category	Welding System
Language	English