ESAB Rustler EM 201C User Manual

5  OPERATION
0463 933 001
- 19 -
© ESAB AB 2023
Figure A. Figure B.
To check that the feed pressure is set correctly, you can feed out the wire against an insulated object,
e.g. a piece of wood.
When you hold the welding torch approx. 5mm from the piece of wood (figure A) the feed rollers
should slip.
If you hold the welding torch approx. 50mm from the piece of wood, the wire should be fed out and
bend (figure B).

ESAB Rustler EM 201C Specifications

General

Brand	ESAB
Model	Rustler EM 201C
Category	Welding System
Language	English