Figure 4ae: Auto Calibration Complete Screen
4.6.2 Manual Calibration
1. From diagnostic screen, <click> on the Calibration button, see Figure 4af.
Figure 4af: Calibration button
2. <click> Motor Calibration, then <click> Calibration, finally <click> Manual
Calibration, see Figure 4ag.
Figure 4ag: Motor Calibration Tab Menu
3. Next a Home Axes screen will popup. See Figure 4ah. <click> Yes to home the axes
and No if there is no need to home the axes.
Figure 4ah: Manual Calibration popup
To Next Page
Loading...
