ESX Vision Series - 3. Updates; 3.1 MCU Update

30
Check under www.esxnavi.de or ask your retail dealer, if update les for your device are available. Then follow the
installation instructions that come with the update.
After you have decompressed the downloaded MCU update, copy the les to your SD card or USB stick. Insert the SD
card or USB stick into the device.
Apps > Settings
> Car Settings
> MCU update
Mark the circle symbol and then conrm the entry.
Wait until the update is completed. The system of the device will automatically restart, after the update is
completed. Please don not turn off the device during the update process.
3.1 MCU UPDATE
3. UPDATES