Etac Cross 5 - Rear Seat Height; Adjusting Rear Seat Height by Changing Rear Wheel Position or Rear Wheel Size

15
Etac / Cross 5 / www.etac.com
1
2
4
3
20 Nm
Rear seat height can be adjusted by:
-Changing the position of the rear wheel in the
frame.
-Changing the position of the rear wheel in the
camber washer.
-Changing the rear wheel.
Tipping risk! Always check the anti-tip function
after adjustments!
1. Remove the rear wheel.
2. Unscrew the nut.
3. Reassemble in desired position (see table in section
”Rear seat height table”).
Tipping risk! Always check the anti-tip function
after adjustments!
5. Settings
Adjusting rear seat height by changing rear wheel position or rear wheel size
Rear seat height
24 mm
Cross 5 Cross 5 XL