Etac Cross 5 - Head Support

46
Etac / Cross 5 / www.etac.com
“Click”
“Click”
“Click”
10. Accessories - adjusting, handling
Head support
Cross 5 Cross 5 XL
The head support is mounted onto the bow handle
(accessory) or onto a separate head support attach-
ment. The head support is adjustable in height, depth and
angle, and is detachable.
Before the head support is adjusted, ensure that the
user has a good, secure sitting posture.
The center of balance might be altered when the
user leans against the head support.
Head support attachment
Cross brace
The cross bar is used when the back chassis needs to
be reinforced.
Do not lift the wheelchair by the cross bar.
The head support attachment is used to fit the head
support.
Do not lift the wheelchair by the head support
mount.