Etac Cross 5 - The Chairs Possibilities

5
Etac / Cross 5 / www.etac.com
In the section ”The chair’s possibilities” you can see all the adaptions possible on the wheelchair. Variations
may occur in different markets, e.g. as regards back support models. For more information, see www.etac.com
or contact our customer service.
More so called ”odd combinations” are available, for example rear wheels and castor wheels. Please, contact
our customer service for more information.
Cross 5 Cross 5 XL
Seat height
Seat height rear
Seat height front
Front 34-56.5 cm
Rear 34-53 cm
Seat angle
Max forward angle: 2 cm lower front than back (3°)
Max backward angle: 6 cm higher front than back (9°)
Castor wheel
4” massive (max user weight 100 kg)
5” massive (with Cross 5 XL max user weight 135 kg)
6” semipneumatic
6,5” massive
7” massive soft
8” semipneumatic
Front fork
Extra short (two alternative wheel height positions)
Short (three alternative wheel height positions). Thickness
of 3 or 4 mm
Medium (three alternative wheel height positions). Thick-
ness of 3 or 4 mm
Long
Rear wheel
20”
22”
24”
24” Carbon (not in combination with drum brakes)
26”
Handrims
Aluminium
Stainless steel
Plastic coated
Cellular rubber (not in combination with drum brakes)
Titanium (not in combination with drum brakes)
Camber angle
2°
0°
Seat
8: 6 Sittsdjup
Black fabric
hard seat
ECS: A fixed seat/back support system with anatomically
shaped cushions, detachable
Back support
3A
(one eccentric
washer)
/
Back support
3A high
(one eccentric
washer)
3A 3A high
Height 32-45 cm 38-51 cm
Back support angle -5° - +20° -5° - +20°
Lumbar angle -16° - +16°
3. The chair’s possibilities