Etac Cross 5 - Settings (Cont.); Seat Angle; Seat Depth; Seat Comfort

31
Etac / Cross 5 / www.etac.com
Cross 5 Cross 5 XL
The seat angle is dependent on the difference
between the front and the rear seat heights.
If the seat angle is changed:
- Adjust the angle of the front fork attachment.
- Check the back support angle.
Tipping risk! Always check the anti-tip function
after adjustments!
The seat depth can be adjusted by lifting the front
seat upholstery and sliding it backwards or forwards.
With Cross back support 3A triangular, the seat
depth can be further adjusted by means of the
lumbar angle (see the section ”Adjusting seat depth
using lumbar angle, triangular back”).
Tipping risk! Always check the anti-tip function
after adjustments!
5. Settings
Seat angle
Seat depth
Seat comfort
After adjusting seat height, seat angle, seat depth
and back support angle, the back support uphol-
stery must be adjusted to optimize the seat comfort.
See the “Settings seat comfort” section in the User
manual.