50
Etac / Cross 5 / www.etac.com
Methods of surface treatment:
Lacquered surfaces = Polyester powder coating or ED-coating
Non-lacquered aluminium parts = Anodized coating
Non-lacquered steel surfaces = Galvanized
Guarantee:
5 year guarantee against material and manufacturing defects.
For terms and conditions, see www.etac.com
Storage:
The device should be stored indoors in a dry place at a
temperature above 5°C. If the device has been stored for a long
time (more than four months), its function must be checked by
an expert before use.
To be sorted according to national regulations
13. Storage and Guarantees
To Next Page
