EasyManua.ls Logo

ETAS ES4455.2 - Rohs Conformity; Identification in Accordance with ISO 7010:2011; Product Return and Recycling

Default Icon
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ES4455.2 Load Carrier Board - User’s Guide16
Introduction ETAS
1.3.3 RoHS Conformity
European Union
The EU guideline 2011/65/EU limits the use of certain dangerous materials for
electric and electronic devices (RoHS conformity).
ETAS confirms that the product meets this directive applicable in the European
Union.
China
With the China RoHS identification attached to the product or its packaging,
ETAS confirms that the product meets the guidelines of the "China RoHS" (Man-
agement Methods for Controlling Pollution Caused by Electronic Information
Products Regulation) applicable in the People's Republic of China.
1.3.4 Identification in Accordance with ISO 7010:2011
Under consideration of the standard ISO 7010:2011, the product is labeled with
the symbol P007: "No access to persons with pacemakers or implanted defibril-
lators".
The products may be used only in areas to which persons with pacemakers and
implanted defibrillators have no access. The user is obligated to attach a label in
accordance with ISO 7010:2011, P007: "No access to persons with pacemakers
or implanted defibrillators", to the entrances to the areas in which the product is
used.
1.4 Product Return and Recycling
The European Union (EU) released the Directive for Waste Electrical and Elec-
tronic Equipment - WEEE to ensure the setup of systems for collecting, treating
and recycling electronic waste in all countries of the EU.
This ensures that the devices are recycled in a resource-friendly way that does not
represent any risk to personal health and the environment.
Fig. 1-3 WEEE symbol
The WEEE symbol on the product or its packaging identifies that the product may
not be disposed of together with the remaining trash.
The user is obligated to separately collect old devices and provide them to the
WEEE return system for recycling.
The WEEE Directive applies to all ETAS devices, but not to external cables or bat-
teries.
Additional information about the recycling program of ETAS GmbH is available
from the ETAS sales and service locations (see "ETAS Contact Addresses"
on page 51).

Table of Contents