ETAS ES4455.2 - Basic Safety Notices; Identification of Safety Notices; General Safety Information; Requirements for Users and Duties for Operators

ES4455.2 Load Carrier Board - User’s Guide 9
ETAS Introduction
1.2 Basic Safety Notices
Please observe the following safety notices to avoid health issues or damage to
the device.
1.2.1 Identification of Safety Notices
The safety notices contained in this manual are identified with the danger symbol
shown below:
The safety notices shown below are used for this purpose. They provide notes to
extremely important information. Please read this information carefully.
1.2.2 General Safety Information
Observe the following safety notices to avoid health issues or damage to the
device.
ETAS GmbH does not assume any liability for damages resulting from improper
handling, unintended use or non-observance of the safety precautions.
1.2.3 Requirements for Users and Duties for Operators
The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Improper use or use by a
user without sufficient qualification can lead to damages or injuries to one's
health or damages to property.
The system integrator is responsible for the safety of systems that use the prod-
uct.
CAUTION!
identifies a hazard with low risk that could result in minor or medium
physical injuries or property damages if not avoided.
WARNING!
indicates a possible danger with moderate risk of death or (serious)
injury, if not avoided.
DANGER!
indicates an immediate danger with a high risk of death or serious
injury, if not avoided.
Note
All product related documentation (product Safety Advice and this User’s
Guide) must be read prior to the startup of the product!