ETAS ES4455.2 - Page 23

ES4455.2 Load Carrier Board - User’s Guide 23
ETAS Properties and Functions
Fig. 2-2 Example for the integration of an ES445x.y in a LABCAR HiL system.
The ES445x.y is installed in the ES5300.1-A Housing or the
ES5300.1-B Housing.
Host PC with ETAS
LCO-IP and CEE
HiL-System (ETAS LABCAR)
Real-Time Environment
(ETAS ES5300.1-A/B HiL Systemhousing;
RTPC included)
Injector Load
ES445x.y
with ES5372.1
Adapter
I Inj.
U Inj.
Angle Synchronous
Measurement
ES5340.2-ICE
with ES5370.1 Adapter
Injection time
x
...
Plant
Model
Realtime Connector
Oscilloscope
Onlineprobe
Configuration
I/O Interface
Injection
time,
Start/Stop
Injection
(SW variable)
(X)ETK
ECU
Vsupply
INCA
x
x
Loadx+
Loadx-
Example for 1 of x Cylinders
Example for y HW version (Diesel,
Gasoline,..)
Digital Signal
I_Dig_Out_1,...4
0...15 V
Angle
sychronous to
the other
cylinders