ETAS 2 Configuration Creation
MDA V8.5 checks whether a file with the same name already
exists. If this is the case, an increment is automatically appended
to the export file name. If the export file name is manually changed
by the user to a file that already exists, a warning message
appears.
5. Click Export.
To define the output raster for exported signals
1. To open the Export Measure Data window, perform step 1 and 2
as described in section "To export measure data" on the previous
page.
2. Select the checkbox Output Raster and define the desired raster
value.
3. Click Export.
This raster will be used for all exported signals.
If no sample exists for a timestamp of the new output raster, the last available
sample before this timestamp is used.
To convert measure data into another file format
1. To open the Export Measure Data window, perform step 1 and 2
as described in section "To export measure data" on the previous
page.
2. From the File Format drop-down menu, select the new file format.
3. Click Export.
To compress measure files
If the file format for the export is MDF V4.1, the resulting file is compressed auto-
matically. This happens also when MdfConvert.exe is used and the target
file format is MDF V4.1. Any other file format does not support compression.
To extract an attachment
In INCA you have the option to attach some files to an MDF file.
In MDA V8.5 you can extract these files to easily recreate the experiment envir-
onment. The measure file containing the attachments is displayed in the File
Explorer with a child node.
To extract the attachments, do the following:
1. In the File Explorer, right-click on the measure file.
2. In the context menu, select Extract Attachment(s).
The Windows Explorer dialog appears.
3. Save the attachments in the desired folder.
The extracted files are individual files.
The extraction process is visible in the overall status of the export
progress.
MDA V8.5 - User Guide 36
To Next Page
