ETAS MDA V8.5 - Page 56

ETAS 4 Calculated Signals
l "To edit a calculated signal" below
l "To rename a calculated signal" below
l "To delete a calculated signal" below
l "To duplicate a calculated signal" below
For more information on how to import calculated signals from an XCS file expor-
ted from INCA or MDA V7, see "Importing Calculated Signals via XCS Export
File" on page26.
To see how you can create and clone a calculated signal, watch our video
Creating Calculated Signals.
To edit a calculated signal
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2.
Click .
3. Change the data. For more information about the possible values
of the entry fields, see "To define a calculated signal" on page53.
To rename a calculated signal
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2.
Click .
3. Enter a new name.
Valid characters are a-z, A-Z, 0-9, underscore, point, and square
brackets. Square brackets must always occur in pairs. Other char-
acters or blank space are not allowed.
After saving, the new name is displayed in all instances where the
calculated signal is used.
To delete a calculated signal
1. In the calculated signal list on the left of the window, select a cal-
culated signal.
2.
Click .
The calculated signal is deleted but the assignment of the cal-
culated signal to instruments is kept.
To duplicate a calculated signal
1. Select a calculated signal in the list on the left of the window.
2. In the context menu, select Clone calculated signal.
A new calculated signal with the given data from the selected sig-
nal is filled in the form. The name is based on the selected signal.
MDA V8.5 - User Guide 56