334 Eos Family Operations Manual
Type
Defines the effect type: step-based, absolute, or relative (linear, focus, or color). To change the type,
press {Type} and then press the desired effect type in the buttons to the left.
<Effect> [1]{Type} {Step based} [Enter]
Scale
Applies only to relative effects. This modifies the amount the pattern is offset from the current para-
meter values. The scale is expressed as a percentage increase or decrease (25 = 25% of the pro-
grammed value).
{Scale} [3] [0][Enter] or you may adjust this using the “Scale” encoder.
Cycle Time
Provides a cumulative time to complete one full iteration of an effect. In relative effects, the cycle
time determines the length of time required for one channel to complete the cycle.
In absolute and step-based effects, the cycle time determines the time required to complete one full
iteration of the effect. In these effect types, modifying the cycle time changes the timing values pro-
portionally within the effect itself.
To change the cycle time, press {Cycle Time} and then enter the desired time (in minutes and
seconds) from the keypad, followed by [Enter]. This can also be adjusted from the encoder.
Duration/Cycle
This determines the length of time an effect will run. To specify, press {Duration/Cycle} and then
choose the desired method from the buttons that appear to the left. The options are:
{Infinite} - for step and absolute effects, the effect will run until the channel is provided a new
instruction or the effect is stopped,. Relative effects with an infinite duration will run until a
stop flag is applied.
{Duration} - the effect will run for a set amount of time given in minutes and seconds. Enter
the time from the keypad.
{Num cycles} - the effect will run for a set number of iterations. Enter the number using the
keypad.
{Duration/Cycles} {Num Cycles} [1] [0] [Enter]
When an effect with duration is running in a cue, the effect will display in light blue while it is running
and dark blue when it has finished. This is only displayed in the Live Summary View.
To Next Page
Loading...
