EasyManua.ls Logo

ETC Gio @5 - Page 547

ETC Gio @5
649 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Show Control 545
OSC Method Arguments Examples/Comments
/eos/wheel/fine/<parameter 1>/
<parameter 2>/...
number for fine wheel ticks (positive or
negative)
/eos/wheel/fine/pan/tilt=1.0
/eos/wheel/course/<parameter>
number for coarse wheel ticks (positive or
nega tive)
/eos/wheel/coarse/pan=1.0
/eos/wheel/course/<parameter
1>/
<parameter 2>/...
number for coarse wheel ticks (positive or
negative)
/eos/wheel/coarse/pan/ tilt=1.0
Switch
Note: Switch is a variant of Wheel with the added functionality of continuously repeating
wheel ticks until a subsequent OSC switch command sets the wheel ticks to zero.
This may be used to continuously tick a wheel while a button is held down, for example. The
expected argument range is -1.0 to 1.0, which affects the tick rate accordingly, but can be a
smaller or larger range for more subtle or rapid movement.
OSC Method Arguments Examples/Comments
Switch/WheelLevel
/eos/switch/level X level wheel ticks
/eos/switch Set OSC wheel mode 0 = Course, 1 = Fine
Switch ModeOutput see Implicit OSC Output (onpage558) for more information
/eos/out/switch Current OSC wheel mode /eos/out/switch=1.0
Swich/Wheeland Encoder Levels
/eos/switch/<parameter> X OSC wheel mode ticks for specified parameter (ex: pan)
/eos/switch/<parameter 1>/
<parameter 2>/...
X OSC wheel mode ticks for specified parameters (ex: red, green,
blue)
/eos/switch/fine/<parameter> X fine wheel ticks for specified parameter (ex: pan)
/eos/switch/fine/<parameter 1>/
<parameter 2>/...
X fine wheel mode ticks for specified parameters (ex: red, green,
blue)
/eos/switch/course/<parameter> X course wheel ticks for specified parameter (ex: pan)
/eos/switch/course/<parameter
1>/
<parameter 2>/...
X course wheel mode ticks for specified param- eters (ex: red, green,
blue)
Active Parameters
Note: The parameter <index> is a 1-based index referencing the list of current parameters
for the selected channel(s).Eos will send the parameter name and current value for each act-
ive parameter, so that the wheels on your OSC-enabled device may be labeled appro-
priately.

Table of Contents

Related product manuals