ETC Gio @5 - Page 548

546 Eos Family Operations Manual
OSC Method Arguments Examples/Comments
Wheel
/eos/active/wheel/<index>
number of wheel ticks for the specific
wheel mode (positive or nega- tive)
/eos/active/wheel/1=1.0 (increase value)
/eos/active/wheel/1=-1.0 (decrease value)
/eos/active/wheel/1=4.0 (increase value rapidly)
(defaults to Coarse mode, but wheel mode can be
changed with the /eos/wheel command)
/eos/active/wheel/fine/<index>
number of fine wheel ticks (positive or
nega- tive)
/eos/active/wheel/fine/1=1.0
/eos/active/wheel/course/<index>
number of coarse wheel ticks (positive or
nega- tive)
/eos/active/wheel/coarse/ 1=1.0
Switch
/eos/active/switch/<index>
number of wheel ticks for the specific
switch mode (positive or nega- tive)
/eos/active/switch/1=1.0 (increase value)
/eos/active/switch/1=-1.0 (decrease value)
/eos/active/switch/1=4.0 (increase value rapidly)
/eos/active/switch/1=0.25 (increase value slowly)
(defaults to Coarse mode, but wheel mode can be
changed with the /eos/ switch command)
/eos/active/switch/fine/<index>
number of fine wheel ticks (positive or
nega- tive)
/eos/active/switch/fine/1=1.0
/eos/active/switch/coarse/<index>
number of coarse wheel ticks (positive or
nega- tive)
/eos/active/switch/coarse/ 1=1.0
ActiveWheelDataSent byEos- see Implicit OSC Output (onpage558) for more information
/eos/out/active/wheel<number>
2 arguments:
String with parameter name and current
value from first channel
/eos/out/active/wheel/1=
”Intensity”, 100
Subscribe to Specific Parameters
Once subscribed, Eos will reply with an OSC packet per parameter as they change.
For Example:
/eos/out/param/pan
See Implicit OSC Output (on page558) for more information.