System Basics 91
You can also make changes to a fader's configuration while in the fader list display by clicking on a
column. A virtual fader will be displayed. Click on the appropriate area of the fader to access the con-
figuration options. Selection can be done by clicking in the column or from the command line.
Range editing is possible in this display by selecting all the needed faders. Changes made to the con-
figuration will be made to all of the selected faders.
With a fader selected, the CIAwill also display a virtual fader and the configuration options for that
fader.
Fader Ribbon
The fader ribbon shows the fader color coding that is used in the fader configuration tools.
Grandmasters and inhibitive submasters are in red, additive submasters are yellow ,playback faders
display in green ,and presets and palettes are orange.
To Next Page
Loading...
Need help?
General
