ETC Source 4WRD - Page 9

Source 4WRD Installation and User Manual 5
Specifications
For full product specifications, see the Source 4WRDLED datasheet at
etcconnect.com.
Electrical
•
114–125 VAC 60 Hz power input
•
155 W draw at full (182 W theoretical max. draw)
•
Recommended two (2) fixtures per dimmed circuit (D20 module)
•
Max of 14 fixtures per non-dimmed circuit (R20 module)
•
If using in DMX mode: Connect fixture to relay, constant power,
or dimmer with regulation off and parked at full
Typical Power Consumption
Mode Power Current
Idle:DMXMode 1.2W .046A
Idle: ACMode 0W 0 A
Full Intensity 155.7W 1.35A
Environment
•
Ambient operating temperature: 5°C–50°C (41°F–122°F)
•
Minimum storage temperature: 5°C (41°F)
•
Maximum recommended ambient operating
temperature:Ta=50°C (122°F)
•
Maximum anticipated external surface temperature: Tmax=63°C
(145°F) at Ta=50°C (122°F)
•
External Temperature (steady state achieved) at 25°C (77°F)
ambient: 38°C (100°F)
Weight
•
Source 4WRDLED retrofit kit only: 3.65lb (1.66kg)
•
Source 4WRDLED installed on 26° fixture with yoke and
C-clamp:14lb (6.35kg)
Optical
Compatible with all ETCSource Four lens tubes.