Eternus DX60 User Manual

Explains manual usage and safety precautions.

Describes environmental conditions for safe operation.

Outlines the manual's structure and chapter contents.

Explains symbols used for warnings and cautions.

Lists other manuals relevant to system setup and operation.

Shows warning and manufacturer labels on the controller enclosure.

Shows warning and manufacturer labels on the drive enclosure.

Shows manufacturer labels on AC outlet boxes (1U and 2U).

Details compact design, energy savings, installation management, and connectivity.

Covers configuration items including RAID levels, groups, and volumes.

Describes supported RAID levels, mechanisms, capacity, and recommendations.

Introduces main functions like Rebuild/Copyback, Advanced Copy, RAID Migration.

Details disk types, host interfaces, LUN mapping, and Host Affinity.

Describes the 3.5" controller enclosure, front, rear views, and controller details.

Describes the 2.5" controller enclosure, front, rear views, and controller details.

Describes the 3.5" drive enclosure, front, rear views, expanders, and power supply.

Describes the 2.5" drive enclosure, front, rear views, expanders, and power supply.

Lists specifications for 1U and 2U AC outlet boxes.

Explains procedures for turning the ETERNUS system power on and off safely.

Details procedures for attaching and removing front and flange covers.

Explains how to enable AC automatic linkage mode via the AUTO POWER switch.

Explains how to wear an anti-static wrist strap for safe handling of components.

Covers package contents check, manual preparation, and installation checks.

Describes the procedure for installing the ETERNUS system into a rack.

Guides through initial setup, date/time, system name, password, and network configuration.

Outlines performing settings using the wizard: RAID, Hosts, Affinity Groups, LUN Mapping.

Covers placement area requirements, installation conditions, and wall outlets.

Describes the procedure for installing the ETERNUS system into a rack, including examples.

Guides on how to install the controller enclosure into a rack, including rail adjustments.

Guides on how to install the drive enclosure into a rack, including handling and rack mounting.

Guides on installing 1U and 2U AC outlet boxes into a rack.

Lists required preparations before connecting cables, including networking and power checks.

Explains connecting LAN cables for operation management and iSCSI.

Explains connecting Fibre Channel cables between system and server/switch.

Explains connecting miniSAS cables for SAS server and drive enclosure connections.

Provides general warnings and procedures for connecting power cords to the system and outlet boxes.

Covers manual preparation and network setting information determination.

Guides through initial setup, date/time, system name, password, and port settings.

Outlines performing settings using the wizard: RAID, Hosts, Affinity Groups, LUN Mapping.

Guides on registering hot spares for disk failure protection.

Explains activating Advanced Copy functions by registering licenses.

Guides on setting up event notification, e-mail, SNMP traps, and remote support.

Covers connecting to servers, installing drivers, and checking connections.

Explains checking system status using GUI or CLI, including component, RAID, and volume status.

Describes installing optional disks, including handling instructions and procedures.

Describes installing drive enclosures, including handling and rack mounting procedures.

Guides on installing additional drive enclosures using the GUI and physical steps.

Explains checking system status and the importance of regular data backups.

Covers maintenance service procedures and the support period.

Explains procedures for replacing components like Fibre Channel, LAN, or SAS cards.

Provides a checklist and procedures for diagnosing and resolving system issues.

Lists detailed specifications for ETERNUS DX60, DX80, and DX90 models.

Lists specifications for optional products like disks, enclosures, and cables.

Lists detected events, severity, TRAP numbers, and their meanings.

Provides copyright and license information for OpenPegasus and OpenSSL.