Eternus DX60 - Chapter 4 Installation Workflow; Installation Preparation

ETERNUS DX60/DX80/DX90 Disk storage system User Guide
82
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
Chapter 4 Flow from Installation to Operation
This chapter explains the flow of work from installation to the start of ETERNUS DX60/DX80/
DX90 operation.
Preparation
(1)
Package Contents Check
Refer to "ETERNUS DX60/DX80/DX90 Disk storage system Package Contents" and
check that there are no missing parts.
Prepare the following manuals:
• "ETERNUS DX60/DX80/DX90 Disk storage system Safety Precautions"
• "ETERNUS DX60/DX80/DX90 Disk storage system Package Contents"
• "ETERNUS DX60/DX80/DX90 Web GUI User Guide"
• "ETERNUS DX Disk storage systems Server Connection Guide"
• Other related manuals, for example, for a server or networking equipment.
(2)
Installation and Connection Check
Check the required space for the ETERNUS DX60/DX80/DX90, conditions and
environment for the location, and the type and number of the wall outlets.
Refer
- "5.1 Installation Preparation" (page 86)
- "6.1 Connection Preparation" (page 106)
(3)
Setup Preparation
•
Complete the following information in the Network Settings label and attach it on
the ETERNUS DX60/DX80/DX90.
- IP address and subnet mask for the ETERNUS DX60/DX80/DX90
- IP address for maintenance work
• Perform the following settings for the PC.
- Set Network Environment
IP address: 192.168.1.2
Subnet mask: 255.255.255.0
- Set the Web browser
Proxy server and Cache: Disable
Java Script, style sheets, and cookies: Enable
Refer
"7.1 Setup Preparation" (page 136)