Eternus DX60 - System Status Check

Chapter 7 Setup
> 7.6 System Status Check
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
181
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
7.6 System Status Check
Check the following status using GUI or CLI.
• ETERNUS DX60/DX80/DX90 parts status
• RAID group status
• Volume status
For status check details, refer to the "ETERNUS DX60/DX80/DX90 Web GUI User Guide".
This section explains the procedure using GUI. For the setup using the CLI
commands, refer to "ETERNUS DX60/DX80/DX90 CLI User Guide".
Refer
"ETERNUS DX60/DX80/DX90 Web GUI User Guide"
"ETERNUS DX60/DX80/DX90 CLI User Guide"