Eternus DX60 - A.2.2 Drive Enclosures

Appendix A Specifications
> A.2 Optional Product Specifications
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
227
Copyright 2010 FUJITSU LIMITED
P3AM-3042-07ENZ0
A.2.2 Drive Enclosures
■ For 3.5" type drive enclosures
Table A.18 3.5" type drive enclosure specifications
■ For 2.5" type drive enclosures
Table A.19 2.5" type drive enclosure specifications
Item Specification
Model name ETLDE2AU ETLDE1AU
Drive interface Serial Attached SCSI (3Gbit/s)
Number of disk slots 12
Number of expanders 2 1
Dimensions (W × D × H) 483 × 650 × 88 (mm) [2U]
Maximum weight 35kg
Power
Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Maximum
power
consumption
AC 100 – 120V 370W
AC 200 – 240V 370W
Maximum heat
generation
AC 100 – 120V 1,332kJ/h
AC 200 – 240V 1,332kJ/h
Environmental
condition
Temperature 5 – 40°C (operating)
Humidity 20 – 80%RH (operating)
Item Specification
Model name ETLDE2BU ETLDE1BU
Drive interface Serial Attached SCSI (3Gbit/s)
Number of disk slots 24
Number of expanders 2 1
Dimensions (W × D × H) 483 × 650 × 88 (mm) [2U]
Maximum weight 35kg
Power
Voltage AC 100 – 120V, AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Maximum
power
consumption
AC 100 – 120V 370W
AC 200 – 240V 360W
Maximum heat
generation
AC 100 – 120V 1,332kJ/h
AC 200 – 240V 1,296kJ/h
Environmental
condition
Temperature 5 – 40°C (operating)
Humidity 20 – 80%RH (operating)