SERVICE BRAKE
The machine is fitted with a service brake that operates on both the rear wheels. By pushing the pedal pos. 1, the brake
gets inserted.
PARKING BRAKE
The machine is fitted with a parking and emergency brake that operates on both the rear wheels.
To lock the machine push the brake pedal (pos.1) down, turn the lever pos.2 anticlockwise to its maximum stroke and then
release it.
Push the pedal (position 1) and turn the lever (position 2) clockwise to release the brake.
If during the washing phase, there is over-absorption of the brushes, the cut-out switch intervenes and
stops the brushes.
To re-start the brushes, activate the cut-out switch again by lifting the switch (pos 1)
To Next Page
Loading...
