Eventide ARGUS 5000 - Displaying a Flight

overwriting an old flight.
Displaying a Flight
When a recorded flight is selected for display, the map display places a series of x's on
the screen at datapoint locations. Flight recorder data points are also displayed on the
PLAN mode screen. In order to prevent clutter, the points are spaced close enough
together to give you a feeling for the continuity of the trip, but far enough apart to
avoid excessive interference with other map objects. As you can see from the
sequence below, there are roughly the same number of datapoints shown regardless of
the map scale.
July 1999 Argus 5000/7000 Ver. 5.xx Reference Manual Part#141003 105