Eventide ARGUS 5000 - Section 7: Option Information

Section 7: Option Information
While the Argus only REQUIRES connection to aircraft power and to a navigation
source, it can also be connected to other aircraft systems, either on its own (as
w described earlier), or with internal and external hardware. This section covers the
operation of these accessories.
! Weather Display Adapter to show Stormscope information on the Argus
! RMI Adapter to show VOR and/or multiple ADF pointers on the Argus
! ARINC Adapter to allow interfacing with certain navigation receivers
Only accessories supplied with your Argus will have appropriate pages inserted. If you
purchase an accessory after your Argus has been installed and delivered, please be sure
to insert the manual pages in this section as detailed in the manual supplement.
! Terminal mode entry and exit
The Argus also allows display of ASCII and graphical information as determined by
^J other manufacturer's products when used in the Terminal mode. This section covers
entering and exiting the terminal mode. If you are using a 3rd party product, its
manual will describe Argus operation with that product. If you are interested in using
the Argus as a display, information on doing so appears here.
! Tandem mode software option
There is a special Argus software option that allows two units to be connected
together with a keypress on either being reflected in the operation of both. This option
is used primarily for training purposes, and is described in this section if installed.
July 1999 Argus 5000/7000 Ver. 5.xx Reference Manual Part#141003 131