Eventide ARGUS 5000 - Page 158

Debugging: The HEX PORT screens
The Argus provides a debugging facility called "hex port." When selected, characters
sent to the Argus are displayed as hex digit pairs followed by a space. All characters,
including the unprintable ASCII characters are displayed this way. For example, the
characters "A<crxli>" would be displayed as "41 OD OA." This facility is useful for
determining why you may be getting unexpected results from terminal commands, as
it can show whether there are missing or extraneous characters. It is possible to
overrun the input buffer when using higher baud rates and scrolling the data.
July 1999 Argus 5000/7000 Ver. 5.xx Reference Manual Part#141003 153