Eventide ARGUS 5000 - Page 211

magnetic fields created by these instruments may cause CRT electron beam deflection.
If such location is necessary and display interference is likely to be experienced,
Eventide has a magnetic shielding kit available. If the ARGUS is used for optional
ADF bearing display, it must be placed within the Operator's field-of-view.
Fabricate all interconnect harnesses to the ARGUS from the appropriate equipment.
In addition, connect the remote SELECT and INFOrmation toggle switch or
pushbuttons. Dress, strip, and crimp Eventide P/N 311040 socket contacts to all
appropriate interconnect wiring and insert within the DB-25S connector 1P1 and 1P2.
NOTE: The remote switch or pushbuttons should be installed in the yoke, cyclic or
collective for user convenience.
July 1999 Argus 5000/7000 Ver. 5.xx Reference Manual Part#141003 207