Note:
(1)The recording frame rate will be automatically calculated. It is suggested to use the
calculated Recording Frame Rate, although it is possible to change this value.
(2) If you wish to save the audio recorded, please select Audio ON, so that the audio can
be transferred to AVI file. Otherwise, select Audio OFF, then the audio recorded will not
be transferred to AVI file.
Note: If you are unable to play “AVI” file downloaded from “DVRViewer”, your PC is
required to install “CODEC”, please go to the following URL:
http://www.cole2k.net/ and
click “Advanced”, then “Download Direct” for downloading
“Cole2k.Media.-.Codec.Pack.V6.0.6.-Advanced-.Setup.exe.” This will enable you to
play “AVI” file successfully.
127
To Next Page
Loading...
