PREAMBLE
This section aims to supply the operator with a basis to gradually learn howto operate the forklift. Learn to use and
predict the reactions of the forklift.
Once seated in the driver’s cab and having made preliminary adjustments, the operator must identify
and learn the
position of the different controls and instruments.
This process is essential in ensuring that the operator is able to work effectively or carry out rapid
punctual
operations
if
suddenly required to guarantee the safety of the operator and the machine. Learn to use controls
in
an open area, free of obstacles,
in
a safe manner without people nearby.
Never use controls suddenly, apply cautionuntil certain of the effect of the controls on the machine.
Before entering
the machine Check and clean
-
Clean all windows, lights, rear view mirrors (if fitted).
-
Check that bolts, joints and screws are tightened and positioned as appropriate.
-
Check that no oil, fuel or coolant leaks exist.
-
Check tyre pressure.
Refer to the “Tyre pressure” chapter
in
the “PERIODIC MAINTENANCE OPERATIONS”
section.
-
Check
that tyres have
no
cuts and that the tyre fabric has
no
visible breakages with deformation.
The
explosion
of a tyre can cause serious injury.
Do
not use the machine with
damaged
or low-pres-
sure tyres or tyres with
excessive wear.
ACCESSING THE MACHINE
Always check that your hands and sole are dry and clean before entering the driver’s cab.
Do
nothold on to or
pull on the steering wheel to access the operator’s cab. Hold the handle provided for this purpose and always
place your foot on the cab step to avoid slipping both
when
entering and exiting the cab.
Access the forklift cab from the left side
The forklift should only be used by authorized and duly trained personnel.
ADJUSTING THE SEAT
The seat must be carefully adjusted to provide a safe and comfortable driving position for the opera-tor.
-Adjusting the distance of the seat from the pedals:
To Next Page
Loading...
