Danger of explosion or short
circuit.
An
explosive mixture of hydrogen gas
will
form during the
recharging of
the battery.
LIQUIDS AND LUBRICANTS
DETAILS OF THE PRODUCTIN
THE PARAGRAPH
Inching and brake fluid tank Hydraulic fluid
LIQUIDS AND LUBRICANTS
ENGINE
OIL
Use the
oil
defined by the manufacturer of the diesel engine (consult the instructions handbook with machine
documentation).
Use
oil
for four stroke engines which meets requirements MIL-L-2104C / API
CD
or above.
Always check the API quality on the oil container label to ensure that it is the required quality.
Your
forklift
leaves the
factory with
SAE 20W40
oil viscosity.
However, depending
on
the climate,
consult the chart to select the most
appropriate viscosity (fig.1). If oils of different brand names are
used, ensure that you completely
empty
the
oil
pan
before adding the
new
oil.
REF.
recommends
oil
for Diesel engines
REPSOL ERT1500
EFFICIENT Reference 461.00099.00.
Lubricants
, oils
and
filter
cartridges
The machine is refuelled with the following lubricant oils:
Transmission
oil
SAE 80W90 or SAE 90 as per API GL5 /MIL-L-2105B
Hydraulic
oil
ISO grade VG-46 as per ISO 6743/4-HV DIN-51544 Part 3HVLP
VG46 for ambient temperatures between 10%C and 40C
VG68 for ambient temperatures normally higher than 40C