DANGER
The following are some of the most frequent and dangerous
instances of improper use:
-
Carrying people on the forklift or an accessory or item of equipment.
-
Lack of strict compliance with the instructions for use and maintenance set out in this manual.
-
Exceeding load limits for the forklift.
-
Working on unstable, unconsolidated ground or on the edge of ditches and trenches.
-
Operating crosswise on slopes.
-
Working during storms.
-
Operating on slopes steeper than recommended.
-
Using accessories or equipment for purposes other than those intended.
-
Using accessories or equipment not authorized or manufactured by ERT1500.
-
Operating in locations with a risk of fire or explosions.
-
Operating in confined or unventilated locations.
PERATOR RISKS
Certain risks could be caused by operators during their work. For example:
-Risks caused by working excessively fast or carrying loads at excessive heights in view of theload or working
environment.
-
Risks caused by applying methods incorrectly when controlling or replacing a hydraulic valve(residual
pressure
-
uncontrolled movements).
-
Risks
caused by
applying
methods
incorrectly
when
dismantling parts such as e.g. cylinders
without
having attached all mobile parts appropriately (risk of mobile parts accidentally falling).
-
Risks caused by the machine accidentally tipping over without use of the seatbelt.
To Next Page
Loading...
