INTRODUCTION
The manual consists of five sections:
Section 1
：
GENERAL INFORMATION
Section
Section 2
：
SPECIAL SAFETY INFORMATION
SectionSection 3
：
OPERATING INSTRUCTIONS
Section 4
：
PERIODIC MAINTENANCE OPERATIONS
Section
Section
5
：
DIAGRAMS AND CHARTS
Section 1,
“GENERAL INFORMATION”,
includes general information on the main parts
of the
machine. This section also lists details of part references and technical characteristics, etc.
Section
2,
“SPECIAL SAFETY INFORMATION”,
is
aimed at personnel
in
charge of the
correct
operation of the machine, repairs and maintenance, and, for companies with a
large number of
machines, the safety manager.
This section also includes the requirements which managers must satisfy and key items of
indispensable safety information.
Section
3,
“OPERATING INSTRUCTIONS” mainly targets operators. This section
illustrates all
control devices and instruments and includes
instructions
on how to use the
forklift:
from starting the engine, to parking and leaving the
forklift.
Section 4, “PERIODIC
MAINTENANCE
OPERATIONS”, mainly targets operators, and
specificallythe maintenance manager and personnel. This section includes information on the
planned
maintenance program, the regularity of operations, which liquids and lubricants to use,
greasing
points, etc.
Section
5,
“DIAGRAMS AND CHARTS”
includes tables
and
related
documents: load
charts,wiring and hydraulic diagrams, etc.
To Next Page
Loading...