SCHEDULED MAINTENANCE
-
In maintenance operations only use original
ERT1500
spare parts.
This is the only way to guarantee that your forklift will re main as technically efficient as when it was
purchased.
-
On
this forklift
as with any other, there are parts and systems which are subject to wear and
misalignment,
which may affect reliability and operator safety, the environment and the area, e.g.
exhaust fume emissions,
etc.
Necessary maintenance
must be
carried out periodically to ensure that the machine
is
kept
in
a condi-
tion similar to
when it left the factory.
In accordance with Work Group
Directives,
inspections of these systems must be carried out period-
ically
and the
results recorded on the forms provided by the Work Authorities of each country. (89/655/EEC and
RD1215/97).
Even
if
repairs
must be
carried
out
with
the
engine
running,
pe
rform
all
repairs
and
m
a
i
n
t
e
n
a
n
c
e
operations
on the
forklift
while unloaded, with the forward/ reverse selection set to neutral and the wheels blocked to prevent
the
forklift
from moving.
Unless otherwise specified, do not start the engine during maintenance operations.
Never use
a flame to check fluid levels.
-
Be environmentally friendly.
When changing oils or other fluids, use an appropriate container to collect the fluid and ensure that
you are not
harming the environment during the operations and take
all
replaced materials
(batteries, coolant, tyres, etc.) to the
appropriate Recycling centres.
In cases of leaks of substances which could be harmful to peopleor the environment, urgently take the
necessary actions to reduce the impact, e.g. in oil leaks, plug the leak, place a container
to collect the
oil,
spread absorbent material or pick up and remove the contaminated ground
if
neces-sary.
-
Roads id e breakdown.
In the case of a breakdown when
driving
on a road, you must use the warning
triangles (if fitted).
To Next Page
Loading...
