would prevent the radiators cooling properly. Never clean the radiators
when
hot with yourbare hands.Use gloves to
remove external
dirt.
Allow the radiators to cool down before cleaning.
If water is available in the working area, rinse the radiator fins with a hose and low pressure water.
Do not use high pressure water, only use low pressure water.
Be
careful not to
damage
the radiators
when
cleaning the fins.
Do
not use any sharp object or tool that
could damage
the fins. The fins are purposely thin parts to allowefficient cooling.
See an authorized ERT1500 dealer to check the correct performance of the cooling system.
OIL TANK LEVEL CHECK
Fine jets of pressurised hydraulic fluid can penetrate the skin.
Never use your
Check the level of hydraulic fluid on a daily basis via the optical level (B)
.
Check the level of oil with the forklift in road translation configuration (horizonta arm lowered).
REP LACING THE HYDROS TATIC TRANS MIS SION FILTER CARTRIDGE
HYDROSTATICTRANS MISSION FILTER
changed at the
intervals
indicated
in
the “LUBRICATION AND MAIN-
TENANCE CHART”
A.- Filter
cartridge
To replace the cartridge filter:
1.
Stop the machine on
flat
ground and check that the parking brake
is
activated.
2.
Place a container under the filter to collect oil leaks.
3.
Unscrew the cartridge
filter
and remove from the support.